|Door Type||Left Hinged|
|Nominal Long Side||14'|
|Nominal Short Side||10'|
|Specials||Made in USA|
Door sections manufactured at Nor-Lake are factory tested to assure proper fit, performance and alignment. All doors feature a stepped profile design that serves as a barrier to air flow which results in an energy efficient door system. Door sections are 4" thick, metal clad and foamed-in-place with EPA-compliant polyurethane insulation. Each Kold Locker™ walk-in compartment is equipped with a 26” wide door opening. The height of the door opening varies with the series of Kold Locker™ walk-in ordered. The 45 Series has a 59” high door, the Standard Series (6’7” high) has a 66” high door opening and the 74 and 77 Series Kold Locker™ walkins have a 78” high door opening. The door is self-closing, flush mounted, infitting and constructed to incorporate heavy duty, molded ABS breaker which is permanently foamed-inplace. Doors are available with right or left side hinges and include two field adjustable cam-lift hinges with locking set screw, top hinge spring loaded, spring actuated door closer, NL 9800 deadbolt locking handle with independent key/ padlock feature and inside safety release. The doors are pre-hung in a four foot wide frame panel which is equipped with replaceable perimeter heater wire, magnetic stainless steel trim, digital thermometer, vapor proof LED light fixture and switch with exterior pilot indicator light. The door section is completely pre-wired within concealed conduit inside the door frame panel. 115/60/1 electrical is field wired to a junction box which is surface mounted next to the interior frame above the vapor proof LED light fixture. Hinges and door handle are mounted to 1/2” synthetic insulated tapping plates. Each door section is complete with a fiberglass reinforced plastic heated threshold.
Floor panels (when supplied) are similar in construction to the wall panels except they are made to withstand uniformly distributed floor loads of up to 800 pounds per square foot. The interior floor metal is smooth aluminum. The 74 Series, floorless models, are supplied with a patented vinyl floor sealer to stop conductivity at floor level. This unique sealer sits flat on existing floors and fits tightly against the interior/exterior wall panels. The walk-in wall panel is supported on the shoulder of the sealer so the foam edge is free of compressing weight. The vinyl floor sealer is NSF listed.
You must be signed in to add reviews. Please click here to sign in or create an account.
Restaurant Equippers works with a number of top-level providers of financing and leasing solutions. Listed below are several companies that may meet your needs in helping to assist you in getting the equipment you need for your business.
If you already work with a different provider we may still be able to assist you. Please contact our National Order Office to speak with one of our professional associates who can assist you in working with your financing partner.
If you need to expedite your order, discuss other delivery options, or make payment by phone rather than using our secure website, call 800-235-3325 during normal business hours for assistance.